Child pages
  • Installing PaperCut Printers on MacOS (Hutchinson Center)
Skip to end of metadata
Go to start of metadata

These instructions are for Hutchinson Center, but others can adapt by  changing "Atrium" for their print queues' friendly name and "UM-HCTR-ATRIUM" for their PaperCut Queue name.

1. Go to Apple Menu > System Preferences > Printers & Scanners

2. In the panel on the left, if you see an existing "Atrium Printer" or "Atrium Printer" click on it once to select it and press the "-" icon in the lower left to delete the existing printer.

3. To add the Atrium Printer, do the following:

        a. Press the "+" icon in the lower left.

        b. In the Add window select "IP"

        c. In "Address" enter:

        d. In "Protocol" choose:
        Internet Printing Protocol - IPP

        e. In "Queue" enter:

        f. In "Name" delete "" and enter:
        Atrium Printer

        g. "Location" is blank

        h. In "Use" select:
        Generic PostScript Printer

        i. Press "Add" and DO NOT check "Duplex Printing Unit" in the next window. Then press "OK".

4. The application program that is required for laptop printing is available at

        a. It's called "". First, double-click on it to decompress it to just "". Then drag the program to your Applications folder (in the Finder, select Go > Applications to open the Applications folder). You can discard the compressed "" file after you copy the "" program to the Applications folder.

        b. BEFORE YOU PRINT, you must open the "" program. The first time you run the program, you may have to right-click (or control-click) on the program and give it permission to Open.

        c. Once the program is running, you can print.

        d. Choose the document to print, and select the "Atrium Printer" from the print menu.

        e. The attached four screens illustrate what you'll see after you log in with your ID to print.

  • No labels